汉高汉高乐泰乐泰 Ablestik 84-1 LMI SR
技术服务热线：021-51693135 / 021-22818476
ABLESTIK 84-1LMISR4-S25 electrically conductive die attach adhesive has been formulated for use in high throughput, automated die attach equipment. This material is a version of ABLEBOND 84-1LMISR4 that contains 25 μm silver spacers for bondline control.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Thixotropic Index (0.5/5 rpm) 5.6
Viscosity, Brookfield , 25 °C, mPa•s (cP) 9,500
Fineness, Hegemann, μm, Max 45
Density, g/cm3 3.8
Work Life, hours 18
Storage Life @ -40°C (from date of manufacture), year 1
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
1hour @ 175°C
The above cure profiles are guideline recommendations. Cure conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties:
Glass Transition Temperature, Tan δ, °C 140
Young's modulus:
@ 25°C N/mm2 3,000
(psi) (435,113)
Electrical Properties:
Volume Resistivity, ohm-cm 5×10
TYPICAL PERFORMANCE OF CURED MATERIAL
Shear Strength:
Tensile Lap Shear Strength N/mm2 8
(psi) (1,160)
84-1lmisr4-s25 ABLESTIK导电贴片胶已用于高吞吐量的制定，自动贴片设备。这种材料是一个版本的84-1lmisr4 Ablebond包含25μM银间隔的胶层控制。
固化材料的典型性能
触变指数（0.5/5转）5.6
粘度，Brookfield，25°C，MPA的•（CP）9500
细度、Hegemann、μm，马克斯45
密度，克/厘米3.83
工作寿命，小时18
贮存寿命@ 40°C（自制造之日起），第1年
闪光点看到MSDS
典型的固化性能
治疗计划
1hour @ 175°C
上述固化型材指南建议。固化条件（时间和温度）可能会根据客户的经验和他们的应用要求，以及客户固化设备，烘箱负荷和实际烤箱温度变化。
固化材料的典型性能
物理性质：
玻璃化转变温度，谭δ，°C 140
杨氏模量：
“25°C N / mm23000
（PSI）（435113）
电气性能：
体积电阻率，欧姆厘米5×10
固化材料的典型性能
抗剪强度：
拉伸剪切 |
 |
|
手机站
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
